You must have javascript enabled to use playerm.com !

TECSUN Steel Whip Antenna for PL300WT / PL310 / PL380 / DR920 / R9012

Radio

USD $9.90

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

TECSUN Antenna
Item Details
This replacement antenna can easily be replaced without disassembling the receiver. The antenna comes with the original swivel mount. The swivel mount contains pressure washers to ensure good conductivity from the antenna to the brass mounting lug, so replacing the entire assembly is recommended and also the most straightforward.
Simply remove the single black screw in the top right hand corner of the rear panel of the radio, the one located right below the antenna, and gently remove the antenna to be replaced. Then insert the new antenna and rotate it until the mounting hole is visible through the rear of the case and insert the mounting screw. PLEASE NOTE:
Is your radio’s manufacturing date from before
May 2017?
-  The screw hole at the bottom of this antenna is too large for a 1-on-1 replacement.
-  As long as the bottom section of your old antenna is in good condition, you can still replace the top section of the antenna. Remove the bottom part of your old antenna by unscrewing it, and then place it on the new antenna (see photos attached to this listing).
-  Please take care when removing the screw from the bottom part of your old antenna. There are two washers on the inside that tend to go out of position, which can be a little bit tricky.
  • Suitable for: PL300WT/ET, PL310(ET), PL380, DR920(C), R9012
  • Ships with Tracking Service
  • Length while closed (approx.): 11.2 cm (4.4 inches)
  • Length while open (approx.): 54 cm (21.3 inches)
  • Diameter of pivot screw (approx.): 2.4 mm (0.09 inches)
  • Shipping Policy
  • We ship this item by USPS Ground Advantage within 2 business days (Mon-Fri) after receiving payment. Please assure your address provided through eBay is correct, once the item has dispatched we cannot withdraw it from the delivery services.
  • In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
  • This item may not be able to shipped together with other items.

  • Returns Policy
  • If you are not happy with your item, then you are entitled to a full refund if it is returned within 30 days.
  • If you have simply changed your mind, then you have to cover return shipping costs (we suggest using a trackable method).
  • If you believe the item to be damaged upon receiving it, please contact us to find out if we may have some advice for using it. If it is indeed defective and requires replacing, then you will not be responsible for the return postage.
  • SEND US AN EBAY MESSAGE:
  • Please feel free to contact us if you have any questions about this item, or any other item that we have or you expect that we might have. Feel free to let us know if you would like to receive any advice about using an item, or if you would like to have suggestions about which of our items would be most suitable for you.....we are more than happy to assist you!
  • Returns Accepted for this item if it's within 30 Days

    TECSUN Steel Whip Antenna for PL300WT / PL310 / PL380 / DR920 / R9012 Radio
    tecsun
    See more
    Price type
    IN STOCK OUT STOCK